2002 Mazda Bongo

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Lower of chassis leg (6.1.1 (c) (i))

Emissions unable to be completed (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Exhaust has a major leak of exhaust gases Flexi section (6.1.2 (a))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Lower of sill (7.1.1 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Lower of chassis leg (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement inner edge (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

inner sills corroded

underbody corroded

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Inner sills corroded

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Inner sills corroded

Front Brake pad(s) wearing thin both sides (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

after market l.e.d around nearside head light not working

plastic covers on outer sills

surface rust both inner sills/floor panels

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Rear fog lamp not working (1.3.2b)

Front Brake pad(s) wearing thin both sides (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

after market l.e.d around nearside head light not working

plastic covers on outer sills

surface rust both inner sills/floor panels

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both rear tyres perished/cracked

side repeaters not fitted, both front indicator lens' shaped in such away tat an amber flash can been seen from the side

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Rear Rear fog lamp not working (1.3.2b)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both rear tyres perished/cracked

side repeaters not fitted, both front indicator lens' shaped in such away tat an amber flash can been seen from the side

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside front aftermarket l.e.d not working

side repeaters not fitted, front indicator lens' have mouldings that light up and are clearly visible from side view

Offside Rear Rear fog lamp not working (1.3.2b)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

nearside front aftermarket l.e.d not working

side repeaters not fitted, front indicator lens' have mouldings that light up and are clearly visible from side view

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

off side head lamp beam image poor