2002 Derbi Senda

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

front tyre worn low and uneven

Direction indicator likely to become detached both rear (4.4.1 (c) (ii))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake pad(s) contaminated (1.1.13 (b))

Headlamp light intensity severely reduced incorrect pattern (4.1.4 (a))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Direction indicator obviously incorrectly positioned (4.4.3 (a))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear reflector missing (4.8.2 (a) (ii))

Stop lamp not working from front brake lever (4.3.1 (a) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake pad(s) close to minimum limit on limit (1.1.13 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

front brake lever short

front tyre worn uneven

Clutch lever shortened. (6.2.1g)

Headlamp aim headlamp deteriorated but function not impaired (1.2.3a)

Drive chain excessively loose (6.2.1d)

Drive chain fouling another component can touch rear tyre (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front suspension has inadequate damping effect. (2.3.6c)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Nearside Brake pad(s) contaminated by oil or grease (3.2.A1k)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Clutch lever shortened. (6.2.1g)

Headlamp aim headlamp deteriorated but function not impaired (1.2.3a)

Rear wheel bearings have slight free play (2.4.A.2c)

Clutch lever shortened. (6.2.1g)

Clutch lever shortened. (6.2.1g)

Headlamp aim too high (1.6)

Riders seat insecure (6.2.1a)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear wheel bearings have slight free play (2.4.A.2c)

all lights covered with masking tape

rear suspension operation slightly stiff

Handlebar deformed (2.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Direction indicators flashing less than 60 times a minute (1.5.1c)

Front Headlamp aim too high (hotspot centre above the horizontal 0% line) (1.6.1)

Front Headlamp aim too high (hotspot upper edge above the horizontal 0% line) (1.6.1)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel spoke excessively loose (4.2.1b)

Horn not working (1.7.3a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k) DANGEROUS

Front Brake lever is inoperative (3.1.3c) DANGEROUS

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii)) DANGEROUS

Front Brake pad(s) contaminated by oil or grease (3.2.A1k) DANGEROUS

Front Headlamp insecure (1.2.3b) DANGEROUS

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS