2002 Kymco Stryker Trail

Clutch lever shortened. (6.2.1g)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Oil leak

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel spoke slightly loose. (4.2.1b)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Brake component cracked and seriously reduced in strength (3.2.A1)

Drive chain excessively loose (6.2.1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake caliper(s) insecure (3.2.A1j)

Headlamp aim too low (1.6)

Headlamp insecure (1.2.3b)

Offside Front Footrest insecure (6.2.1a)

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b)

Steering movement excessively rough with the weight on the lower bearing (2.2.1a)

Clutch lever shortened. (6.2.1g)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Oil leak

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel spoke slightly loose. (4.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain slightly loose (6.2.1d)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear Wheel spoke slightly corroded. (4.2.1b)

Drive chain excessively loose (6.2.1d)

Front Wheel spoke excessively loose (4.2.1b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake linkage has abnormal movement due to maladjustment (3.2.A1i)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Footrest missing (6.2.1a)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear Wheel spoke slightly corroded. (4.2.1b)

Rear Wheel spoke slightly loose. (4.2.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Horn not loud enough to be heard by another road user (1.7.3a)

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)