2013 Lexmoto Ht

Drive chain sprocket excessively loose (6.1.7 (c) (i))

Offside Rear Shock absorber insecurely attached (5.3.2 (a) (i))

Suspension arm pin or bush excessively worn swing arm bearings / bushes (5.3.4 (a) (i))

Engine mounting/bracket excessively loose to swing arm (6.1.8 (a) (ii)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

unable to open fuel cap

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Shock absorber has a light misting of oil both front stansion legs (5.3.2 (b))

Front Headlamp reflector seriously defective (4.1.1 (b) (ii))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp insecure (4.1.1 (c))

Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Upper Shock absorber insecurely attached nut missing (5.3.2 (a) (i))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Shock absorber has a light misting of oil both front stansion legs (5.3.2 (b))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Headlamp aim too high (4.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Brake grabbing severely (1.2.1 (c))

Steering operation fouling on the fuel tank or bodywork on full lock lock stop broken of frame (2.1.4 (b))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Brake binding but not excessively rear brake noisey but rolling road performance good not metel to metel noise. (1.2.1 (f))

Nearside Front Exhaust has a minor leak of exhaust gases down pipe (6.1.2 (a))

Brake binding but not excessively rear brake noisey but rolling road performance good not metel to metel noise. (1.2.1 (f))

Headlamp aim too far to the right lens loose so realigned and secured (4.1.2 (a))

Nearside Front Exhaust has a minor leak of exhaust gases down pipe (6.1.2 (a))