2012 Honda Cbf 125

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

All direction indicators not working (4.4.1 (a) (ii))

Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Drive chain excessively loose (6.1.7 (c) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim too high (1.6)

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

chain & sprockets worn

Drive chain excessively loose (6.2.1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

chain & sprockets worn

Drive chain slightly tight (6.2.1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain excessively loose (6.2.1d)

Drive chain sprocket worn to excess (6.2.1e)

Front Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)