2002 Mazda Bongo

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Quarter panel (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Quarter panel (6.1.1 (c) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Body component corroded and likely to cause injury wheel arch edges (6.2.1 (a) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/front outrigger (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Body component corroded and likely to cause injury wheelarch edges (6.2.1 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/front outrigger (5.3.6 (a) (i))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Passenger's seat insecure rear row of seats (6.2.6 (a) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge on 3mm (5.2.3 (e))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre worn close to legal limit/worn on edge on 3mm (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front headlamp beam pattern poor

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Front Brake pad(s) wearing thin (3.5.1g)

Parking brake lever has little reserve travel (3.1.6b)

Rear fog lamp emits a light other than red (1.3.2e)

Front Brake pad(s) wearing thin (3.5.1g)

Parking brake lever has little reserve travel (3.1.6b)

Rear fog lamp emits a light other than red (1.3.2e)

Rear fog lamp tell tale not working (1.3.1b)

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Offside Stop lamp not working (1.2.1b)