2016 Lexmoto Zsa

Both switch gears loose.

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Chain guard missing ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Non obligatory mirror damaged Both ()

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Wheel alignment slightly misaligned (2.4 (a))

Both switch gears loose.

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Chain guard missing ()

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Non obligatory mirror damaged Both ()

Rear Brake component insecure (1.1.21 (c))

Rear Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Drive chain sprocket excessively loose (6.1.7 (c) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

All position lamps not working (4.2.1 (a))

Footrest missing Pillion. (6.2.12 (a))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Headlamp aim too low (4.1.2 (a))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Drive chain excessively loose cush area. (6.1.7 (c) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Suspension arm pin or bush excessively worn Swinging arm (5.3.4 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Both switch gears loose.

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Chain guard missing ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Rear Position lamp not working (4.2.1 (a))

Drive chain slightly tight (6.1.7 (k) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Headlamp light intensity reduced (4.1.4 (a))

Position lamp light intensity obviously reduced (4.2.3 (a) (i))