2014 Pulse Wy

Front Brake binding but not excessively (1.2.1 (f))

Shock absorber has a light misting of oil (5.3.2 (b))

Engine mounting/bracket damaged but not to excess small play in fork bushes (6.1.8 (a) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Registration plate slightly loose secured by use of cable ties,but is secure. (0.1 (a))

ignition switch faulty,but can be used.

front and rear tyre valves are cracked, with front tyre flat at time of test

Headlamp aim too low on dip beam (4.1.2 (a))

Offside Front Shock absorber has a serious fluid leak fork seal leaking,excessive (5.3.2 (b))

Rear Brake disc contaminated (1.1.14 (b))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Steering headbearing in such a condition that steering control is adversely affected headraces notchy (2.2.2 (f) (ii)) DANGEROUS

Engine mounting/bracket damaged but not to excess small play in fork bushes (6.1.8 (a) (i))

Exhaust slightly loose silencer mounting slightly loose (6.1.2 (a))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Rear Brake caliper slightly damaged but function not impaired caliper pivot bushes worn,allowing caliper to move,not excessive (1.1.16 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Registration plate slightly loose secured by use of cable ties,but is secure. (0.1 (a))

ignition switch faulty,but can be used.

rear brake failed to lock rollers on brake test,not as good as expected.

front and rear tyre valves are cracked, with front tyre flat at time of test