2012 Yamaha Wr 125 X

Rear Brake excessively binding (1.2.1 (f))

Rear Footrest missing (6.2.12 (a))

Wheel alignment incorrect which adversely affects the steering (2.4 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Rear Brake excessively binding (1.2.1 (f))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Forks slightly corroded Pitted. (2.2.2 (d) (i))

Offside Forks slightly corroded Pitted. (2.2.2 (d) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Lower Suspension rod ball joint worn, but not excessively (5.3.4 (a) (i))

Exhaust noisy (8.1.1 (a))

Chain guard missing ()

Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Chain guard missing ()

Exhaust noisy (8.1.1 (a))

Head race bearings slightly notchy

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Head race bearings slightly notchy

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing has slight free play (2.2.2)

Headlamp aim too high (1.6)