MOT Status
ExpiredMileage
78,541 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake performance unable to be tested (1.2.1 (g))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Nearside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))
Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))
Offside Rear Exhaust mounting defective (6.1.2 (a))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material to flexi (1.1.11 (c))
Offside Rear Exhaust mounting defective (6.1.2 (a))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Central Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Central Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear exhaust corroded
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake pipe corroded, covered in grease or other material all four brake pipes (1.1.11 (c))
Central Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside front brake application uneven (3.7.B.2)
Nearside front brake binding (3.7.B.1)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
front brake application uneven (3.7.B.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Lower Shock absorber has a slightly worn bush (2.7.4)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Lower Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Perodua Myvi Sxi?
Based on 3,985 MOT tests across 327 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WA60 BFE is a 2010 Perodua Myvi Sxi in Black with a 1,298cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 75%.
Across all 2010 Perodua Myvi Sxi models, the average MOT pass rate is 76.6% with a typical mileage of 47,031 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Perodua Myvi Sxi fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 63 recorded failures. If you're considering buying WA60 BFE, it's worth having these areas checked by a mechanic before committing.
The Perodua Myvi Sxi typically stays on UK roads for around 19 years. At 16 years old, this Perodua Myvi Sxi is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WA60 BFE?
You can check the full history of WA60 BFE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WA60 BFE registered?
WA60 BFE is a 2010 Perodua Myvi Sxi, first registered on 3 November 2010.
Is WA60 BFE safe to buy?
The MOT history for WA60 BFE shows 16 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WA60 BFE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WA60 BFE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.