2008 Piaggio Fly 100

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too high (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Rear Brake lever pivot has excessive free play pivot bolt missing and dangerous (1.1.1 (b))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Registration plate does not conform to the specified requirements (0.1 (d))

Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Headlamp insecure (4.1.1 (c))

Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Headlamp light intensity reduced on dip beam (4.1.4 (a))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Slight tightness noted in front brake

Front Tyre worn close to the legal limit (5.2.3 (e))

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre low pressure

Headlamp aim too low (1.6)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre low pressure