2000 Sym Red Devil

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Upper Exhaust has a major leak of exhaust gases (6.1.2 (a))

Fuel cap missing (6.1.3 (b) (i))

Rear Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Motorcycle structure slightly corroded rear frame underside (6.1.1a)

Rear shock absorber has a light misting (2.4.A.1c)

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(i))

Motorcycle structure slightly corroded (6.1.1a)

Nearside Brake lever is bent but brake can still be readily applied (3.1.3c)

Front tyre worn at offside tread area

Nearside Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(i))

Nearside Brake lever is bent but brake can still be readily applied (3.1.3c)

Nearside Brake lever is bent but brake can still be readily applied (3.1.3c)

Nearside Brake lever is bent but brake can still be readily applied (3.1.3c)

Nearside Brake lever is bent but brake can still be readily applied (3.1.3c)

One of the two stop/tail bulbs is not working.

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Tyre tread not clearly visible (4.1.3(i))

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Exhaust slightly deteriorated (7.1.1a)