2000 Gilera Runner

Rear reflector missing (4.8.2 (a) (ii))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

rear brake pipe insecure

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp emits other than a steady red light (1.3.1b)

Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking center stand return spring weak.allows the stand to come down. (6.1.1c) DANGEROUS

Rear Brake disc(s) slightly pitted (3.2.A1l)

Front Headlamp switch faulty (1.2.4)

Rear Brake pipe excessively corroded (3.2.B2a)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Front Brake disc(s) slightly pitted (3.2.A1l)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Lower Motorcycle structure slightly corroded (6.1.1a)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake pipe slightly corroded (3.2.B2a)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i)) DANGEROUS

Front Brake disc(s) slightly pitted (3.2.A1l)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Lower Motorcycle structure slightly corroded (6.1.1a)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake pipe slightly corroded (3.2.B2a)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly pitted (3.2.A1l)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Front suspension assembly slightly corroded. (2.3.1)

1 of 2 bulbs working on dipped beam

Front suspension assembly has slight free play between the sliding members (2.3.4)

Rear Brake pipe slightly corroded (3.2.B2a)

front and rear tyres cracking on walls

Front suspension assembly has slight free play between the sliding members (2.3.4)

Rear Brake pipe slightly corroded (3.2.B2a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Registration plate deteriorated (6.3.1d)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Rear Brake pipe slightly corroded (3.2.B2a)

Rear Brake pipe slightly corroded (3.2.B2a)

number plate cracked

Exhaust is leaking and excessively noisey (7.1.1b)

Fuel cap sealing washer missing (7.2.2c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Inner Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.2)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i)) DANGEROUS

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i)) DANGEROUS

n/s headlamp bulb missing