2000 Sym Husky

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

chain incorrectly adjusted

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

chain incorrectly adjusted

Drive chain worn to excess (6.1.7 (c) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))

Rear All direction indicators obviously incorrectly positioned (4.4.3 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate incorrect (0.1 (c))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Gear change linkage slightly loose

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear Stop lamp remains on when the brake is released (1.3.1e)

front brake pads getting thin