2000 Honda VT125C

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Central Front Tyre worn close to the legal limit (5.2.3 (e))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Brake component inadequately mounted (1.1.21 (c))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Motorcycle structure joining/attachment plate or fastening insecure Rear brake plate securing bar is loose and split pin missing. (6.1.1 (b) (i))

Rear reflector missing (4.8.2 (a) (ii))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Offside Front Upper Right hand handle bar will require to be attached to handlebars in case it fouls steering operation.

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Front tyre is soft and affects steering of motorcycle.

Offside Rear Rear offside saddle bag is fouling on the rear wheel.

free play at gearchange

Front Brake hose is likely to be fouled or trapped by moving parts insecure (3.2.B2c)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

free play at gearchange

Exhaust excessively deteriorated (7.1.1a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Upper Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b)

Rear Brake locking device missing (3.2.A1e)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Headlamp aim too low (1.6)

Rear reflector on motorcycle missing (1.4.1)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

handlebars slightly bent

Fairings insecure and likely to impede the steering (2.1.2e)

Headlamp aim too high (1.6)

Rear reflector on motorcycle missing (1.4.1)

Front Tyre worn close to the legal limit (4.1.3(ii))

handlebars slightly bent

Centre Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.2)