2000 Suzuki GS125

Front Shock absorber has negligible damping effect (5.3.2 (b))

Nearside Rear Drive chain excessively loose (6.1.7 (c) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Steering operation insecure but not likely to impede the steering Possible wheel spindle not tight enough (2.1.4 (e))

Central Front Steering headbearing slightly stiff or notchy Slightly tight (2.2.2 (f) (i))

Exhaust has a minor leak of exhaust gases Minor leak at cylinder head (6.1.2 (a))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Nearside Rear Drive chain slightly loose (6.1.7 (c) (i))

Offside Brake pedal has slight side movement indicating a worn pedal bearing or pivot Pivot bolt slightly loose (1.1.1 (b))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Drive chain worn to excess (6.2.1e)

Front suspension has inadequate damping effect. (2.3.6c)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain excessively loose (6.2.1d)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front suspension has inadequate damping effect. (2.3.6c)

Front wheel bearings have excessive free play (2.3.5b)

Front wheel spindle securing nut locking device missing (2.3.5a)

Front wheel spindle securing nut(s) loose (2.3.5a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement excessively stiff with the wheel raised (2.2.1b)