2000 Ducati 750

Direction indicators not working (1.5.1c)

Drive chain excessively loose (6.2.1d)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear wheel bearings are excessively rough (2.4.A.2c)

Rear wheel bearings have excessive free play (2.4.A.2c)

Stop lamp remains on when the brake is released (1.3.1e)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k) DANGEROUS

Nearside Front shock absorber seal failed and leaking oil (2.3.3) DANGEROUS

Offside Front shock absorber seal failed and leaking oil (2.3.3) DANGEROUS

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

clutch fault noted

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Steering movement slightly 'notchy' (2.2.1a)

Rear reflector on motorcycle missing (1.4.1)

Front Front wheel bearings are excessively rough (2.3.5b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Nearside Front Brake pad(s) close to minimum limit (3.2A1f(ii))