2000 Honda VT125C

Exhaust noisy

Rear lamp taped on but not likely to fall off at time of test

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Brake cylinder leaking hydraulic fluid (3.2.B1e)

Horn control not readily accesible. switch gear loose (1.7.2a)

Nearside Front Direction indicators not working (1.5.1c)

Rear lamp taped on but not likely to fall off at time of test

Indicator tell tale not functioning (1.5.2)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride stand (6.2.1h)

Nearside Front Direction indicator missing (1.5.1a)

Nearside Rear Direction indicators flashing less than 60 times a minute (1.5.1c)

Offside Front Direction indicator missing (1.5.1a)

Offside Rear Direction indicators flashing less than 60 times a minute (1.5.1c)

Rear reflector on motorcycle missing (1.4.1)

Registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2b)

Riders seat insecure (6.2.1a)

headlight masked at time of test

Drive chain worn to excess (6.2.1e)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim beam image kick up to the offside (1.6)