2000 Ford Explorer

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Body mounting fixing insecure not significantly reduced corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Body mounting fixing insecure not significantly reduced corroded

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Body mounting fixing insecure, but overall security not significantly reduced corroded (6.2.2 (c) (i))

Offside Front Body mounting fixing insecure, but overall security not significantly reduced corroded (6.2.2 (c) (i))

Offside Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

parking brake minimum effort just met

parking brake minimum effort just met

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Body mounting fixing insecure, but overall security not significantly reduced corroded (6.2.2 (c) (i))

Offside Front Body mounting fixing insecure, but overall security not significantly reduced corroded (6.2.2 (c) (i))

Offside Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Valve stem seriously damaged (5.2.3 (j))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Central Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Front Upper Suspension arm locating pin insecure (2.4.G.3a)

Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Registration plate lamp not working (1.1.C.1d)

rear brake binding (3.7.B.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Leaf spring shackle bracket corroded but not seriously weakened (2.4.B.6d)

eml light on

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Leaf spring shackle bracket corroded but not seriously weakened (2.4.B.6d)

eml light on

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Front registration plate deteriorated (6.3.1d)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

n/s/f brake has a light bind

rear brake pads are very thin

n/s/f brake has a light bind

rear brake pads are very thin

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front number plate cracked

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Exhaust system not adequately supported (7.1.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

front number plate cracked

Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Rear Brake pad(s) wearing thin (3.5.1g)