2000 Aprilia RS

Front Brake disc worn, but not excessively Disk rotor to disc centre has slight side and rotational play. (1.1.14 (a) (i))

Front sprocket cover missing.

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Front Stop lamp not working (4.3.1 (a) (ii))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Brake disc worn, but not excessively Floating disc rotor to centre mountings (1.1.14 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) close to minimum limit pads loose in caliper but acceptable (1.1.13 (a))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, but not excessively Floating disc rotor to centre mountings (1.1.14 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Lower Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Horn not working (7.7 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Brake disc worn, but not excessively Floating disc rotor to centre mountings (1.1.14 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Handlebar mounting insecure (2.2.1 (a) (i))

Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c))

Rear Suspension arm pin or bush excessively worn Swinging arm pivot (5.3.4 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Valve stem seriously damaged Badly split (5.2.3 (j)) DANGEROUS

Brake disc worn, but not excessively Floating disc rotor to centre mountings (1.1.14 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Lower Suspension component pin or bush excessively worn (5.3.4 (a) (i))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick worn to metal (1.1.13 (a)) DANGEROUS

Front Tyre worn close to the legal limit on the limit (5.2.3 (e))

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Offside Footrest insecure footpeg assembly loose (6.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Brake fluid reservoir fluid level low (3.2.B1d)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear suspension component seized (2.4A2a(ii))

Brake fluid reservoir fluid level low (3.2.B1d)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)