2000 Yamaha YP250

Fork yoke slightly corroded (2.2.2 (d) (i))

Front Shock absorber has a light misting of oil BOTH (5.3.2 (b))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear BRAKE PAD WORN ONE SIDE

Rear Road spring corroded (5.3.1 (b) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim too low (1.6)

Headlamp insecure (1.2.3b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front wheel bearings have slight free play (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit front tyre sidewalls cracked (4.1.3(ii))

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) has excessive run out (3.2.A1m) DANGEROUS

Front Tyre worn close to the legal limit front tyre sidewalls cracked (4.1.3(ii))

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

rear caliper bush worn

Rear Brake disc(s) is excessively distorted (3.2.A1m)

Front Front wheel bearings are slightly rough (2.3.5b)

Exhaust mounting deteriorated. (7.1.1.c)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Motorcycle structure slightly corroded (6.1.1a)

Rear suspension component slightly corroded. (2.4.A.1a)

Rear wheel bearings are slightly rough (2.4.A.2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust mounting deteriorated. (7.1.1.c)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Motorcycle structure slightly corroded (6.1.1a)

Rear suspension component slightly corroded. (2.4.A.1a)

Rear wheel bearings are slightly rough (2.4.A.2c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) excessively worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Front shock absorber has light misting of stanchion (2.3.3)

Front Tyre worn close to the legal limit (4.1.3(ii))