2000 Triumph Sprint

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Horn not working (7.7 (a))

Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Wheel hub excessively worn (5.2.1 (b) (i))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Brake hose slightly damaged (1.1.12 (b) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Switch gear hits the tank

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

number plate cracked

Brake lever is bent but brake can still be readily applied (3.1.3c)

Headlamp insecure (1.2.3b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

number plate cracked

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

number plate cracked

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain excessively tight (6.2.1d)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))