2000 Triumph Sprint

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced sub frame (6.1.1 (c) (i))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Position lamp not working (4.2.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Motorcycle structure is corroded but structural rigidity is not significantly reduced sub frame (6.1.1 (c) (i))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement slightly stiff (2.2.1b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Direction indicator slightly discoloured (1.5.1b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Drive chain excessively tight (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear suspension bush has excessive free play (2.4.A2a(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1b)

Brake lever has inadequate reserve travel (3.1.3b)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim too low (1.6)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) has slight run out (3.2.A1m)