2000 Yamaha XVS650

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened has some rust (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

no lights fitted at time of test

All direction indicators missing (4.4.1 (a) (ii))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake excessively binding (1.2.1 (f))

Front Stop lamp not working not working on front brake lever (4.3.1 (a) (ii))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Horn not working (7.7 (a))

Rear reflector missing (4.8.2 (a) (ii))

Throttle operating incorrectly idle speed too high (6.2.7 (a) (i))

Central Engine mounting/bracket missing bolt missing (6.1.8 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened rusty (1.1.14 (a) (ii))

Nearside Front ignition turned off when turning left

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Wheel bearing rough when rotated (5.1.3 (b) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front brake disc corroded

Front brake disc corroded

Registration plate does not have black characters on a yellow background (6.3.2a)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Headlamp aim too low (1.6)

Rear Brake pedal cannot be released smoothly (3.1.3d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Offside rear indicator bulb quite dim. Nearside footboard loose in mount, still secure but needs attention.

Front Brake lever is positioned so that the brake cannot be readily applied (3.1.3c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering headbearing has excessive free play (2.2.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))