2000 Harley-davidson XL 1200 C Custom Sport

Nearside Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Offside Front Stop lamp switch does not operate in accordance with the requirements not visible (4.3.2 (a) (i))

Offside Rear Exhaust noisy (8.1.1 (a))

Nearside Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Offside Front Stop lamp switch does not operate in accordance with the requirements cannot be seen due to covers /not fitted (4.3.2 (a) (i))

Offside Rear Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Nearside Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Offside Front Stop lamp switch does not operate in accordance with the requirements not fitted (cannot be seen) (4.3.2 (a) (i))

Exhaust noisy (8.1.1 (a))

Nearside Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Offside Front Stop lamp switch does not operate in accordance with the requirements possibly missing (cannot be seen) (4.3.2 (a) (i))

Front Stop lamp switch does not operate in accordance with the requirements very slight intermitant (4.3.2 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Drive belt worn, but not excessively small puncture on belt (6.1.7 (c) (i))

Rear Tyre worn close to the legal limit perishing on sidewall (5.2.3 (e))

Steering headbearing slightly stiff or notchy very slight (2.2.2 (f) (i))

Front Stop lamp switch does not operate in accordance with the requirements very slight intermitant (4.3.2 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Offside Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Drive belt worn, but not excessively small puncture on belt (6.1.7 (c) (i))

Rear Position lamp showing white light to the rear wrong colour bulb (4.2.3 (a) (ii))

Rear Registration plate incorrect too small (0.1 (c))

Rear Tyre worn close to the legal limit perishing on sidewall (5.2.3 (e))

Steering headbearing slightly stiff or notchy very slight (2.2.2 (f) (i))

Stop lamp showing white light to the rear wrong colour bulb (4.3.3 (a) (ii))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear position lamp insecure (1.1.1c)

Riders seat insecure (6.2.1a)

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Horn not working (1.7.3a)

Exhaust noisy (7.1.2)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim too low (1.6)

Nearside Rear Direction indicator insecure (1.5.3b)

Offside Rear Direction indicator insecure (1.5.3b)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Registration plate margin less than the minimum requirement (6.3.4g)

Registration plate with character(s) which are not the correct height (6.3.4a)

Stop lamp remains on when the brake is released (1.3.1e)

Exhaust noisy (7.1.2)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust noisy (7.1.2)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)