2000 Yamaha YP250

Headlamp not working on main beam (4.1.1 (a) (ii))

Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates a slightly grabbing brake warped disc (1.2.1 (c))

Nearside Rear Shock absorber has a light misting of oil (5.3.2 (b))

Offside Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Tyre worn close to the legal limit 1.5mm (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Tyre worn close to the legal limit 2mm (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Position lamp not working (4.2.1 (a))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Front wheel bearings are excessively rough (2.3.5b)

Nearside Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Offside Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Front Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii)) DANGEROUS

Front Brake disc(s) slightly worn (3.2.A1l)

Front wheel bearings have slight free play (2.3.5b)

Front Floor brake test indicates a severely grabbing brake (3.3.C2d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Headlamp aim too low (1.6)

Headlamp insecure (1.2.3b)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Stop lamp remains on when the brake is released (1.3.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel spindle securing nut(s) loose (2.3.5a)

Headlamp aim too low (1.6)

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1a)