2000 Yamaha XVS650

Exhaust noisy (8.1.1 (a))

Central Rear Tyre worn close to the legal limit on 1mm at time of test (5.2.3 (e))

Indicator tell tale inoperative (4.9.1 (a) (i))

Central Rear Tyre worn close to the legal limit on 1mm at time of test (5.2.3 (e))

Indicator tell tale inoperative (4.9.1 (a) (i))

Offside Rear Lower Brake component insecure nuts loose (1.1.21 (c))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate does not conform to the specified requirements (0.1 (d))

Exhaust noisy (8.1.1 (a))

Rear Position lamp obviously incorrectly positioned (4.2.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Stop lamp obviously incorrectly positioned (4.3.3 (a) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced Frame (6.1.1 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced Swing arm (6.1.1 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Motorcycle structure is corroded but structural rigidity is not significantly reduced Frame (6.1.1 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced Swing arm (6.1.1 (c) (i))

Front Wheel spoke slightly corroded (5.2.2 (d))

Front fork suspension action appears slightly weak/spongy

Front mudguard corroded

MIL light illuminated

Offside Front Direction indicator insecure (4.4.1 (c) (i))

Rear Wheel spoke slightly corroded (5.2.2 (d))

Front Brake excessively binding (1.2.1 (f))

Throttle operating incorrectly throttle sticking (6.2.7 (a) (i))

Front Wheel spoke slightly corroded (5.2.2 (d))

Front fork suspension action appears slightly weak/spongy

Front mudguard corroded

MIL light illuminated

Offside Front Direction indicator insecure (4.4.1 (c) (i))

Rear Wheel spoke slightly corroded (5.2.2 (d))

Offside Front Direction indicator insecure (1.5.3b)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Headlamp switch faulty (1.2.4)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Front Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Front Floor brake test indicates a sticking brake (3.3.C2c)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Front Headlamp aim too low (1.6)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))