2000 Ducati M900

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Exhaust noisy (8.1.1 (a))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Wheel Bearings Slightly Rough

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Front wheel bearing slightly rough

Front wheel bearings are slightly rough (2.3.5b)

Exhaust noisy (7.1.2)

Front Brake disc(s) has slight run out (3.2.A1m)

Front wheel bearings are slightly rough (2.3.5b)

Horn control defective (1.7.2a)

Nearside Front Direction indicator not working (1.5.1c)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp insecure (1.1.1c)

Rear reflector on motorcycle missing (1.4.1)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

slight engine oil leak

Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

Horn control defective (1.7.2a)

Horn not working (1.7.3a)

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Roller brake test indicates a binding brake (3.3.A1a)

exhaust undertray loose