2000 Honda XR400

day time mot

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Rear Registration plate does not conform to the specified requirements TO SMALL. (0.1 (d))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain slightly loose (6.2.1d)

Front Front wheel bearings have slight free play (2.3.5b)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Registration plate deteriorated (6.3.1d)

Drive chain slightly loose (6.2.1d)

Front Front wheel bearings have slight free play (2.3.5b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Wheel spoke excessively loose (4.2.1b)

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b)

Rear Tyre valve stem misaligned which could cause sudden tyre deflation (4.1.2c)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Wheel spoke slightly loose. (4.2.1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

front lower engine mounting plate badly corroded

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Wheel spoke slightly loose. (4.2.1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear reflector on motorcycle incorrectly positioned (1.4.2d)

front lower engine mounting plate badly corroded

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Exhaust noisy (7.1.2)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel spoke excessively loose (4.2.1b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Horn not working (1.7.3a)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear reflector on motorcycle missing (1.4.1)

Registration plate characters incorrectly spaced (6.3.4a)

Registration plate margin less than the minimum requirement (6.3.4g)

Registration plate non-relective border too close to the characters (6.3.4h)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct stroke width (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)