2000 Yamaha DT125

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear wheel bearings have slight free play (2.4.A.2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Rear Wheel spoke excessively loose (4.2.1b)

Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front wheel bearings are tight but not considered excessive (2.3.5b)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front wheel bearings are tight but not considered excessive (2.3.5b)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Lower Motorcycle structure slightly corroded (6.1.1a)

mot for daylight use only & only in good visibility.

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) DANGEROUS

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Lower Motorcycle structure slightly corroded (6.1.1a)

Front Wheel spoke slightly loose. (4.2.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too high (1.6)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel spoke slightly loose. (4.2.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

rear indicators loose