2000 Yamaha TDM850

Nearside Front Shock absorber has a light misting of oil fork seal (5.3.2 (b))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Indicator switch insecure (1.5.4)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Handlebar deformed (2.1.1b)

Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Exhaust is leaking and excessively noisey (7.1.1b)

Rear wheel bearings are excessively tight (2.4.A.2c)

Steering headbearing has excessive free play (2.2.2)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Clutch lever bent (6.2.1g)

Exhaust slightly deteriorated (7.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Direction indicator damaged but function not impaired (1.5.3a)

handlebars slightly bent

Front Brake fluid reservoir fluid level low (3.2.B1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear wheel bearings have slight free play (2.4.A.2c)

clutch lever slightly bent

handlebars slightly bent

nearside switchgear slightly loose

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d) DANGEROUS

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii)) DANGEROUS

Front Brake fluid reservoir fluid level low (3.2.B1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear wheel bearings have slight free play (2.4.A.2c)

clutch lever slightly bent

handlebars slightly bent

nearside switchgear slightly loose

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)