2000 Audi Cabriolet

Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

all exhaust joints corroded

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Fuel Pipe/s corroded ()

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

engine trims fitted

exhaust corroded

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement all front and rear (5.3.4 (a) (i))

under trays fitted

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement all rear arm bushes perished (5.3.4 (a) (i))

engine trims fitted

rear box slightly corroded

under trays fitted

engine trims fitted

under trays fitted

Offside Front Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement all rear arms perished (5.3.4 (a) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement all rear arms perished (5.3.4 (a) (i))

engine trims fitted

under trays fitted

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp insecure (1.7.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Outer Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Nearside Inner Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Inner Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Offside Inner Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)

nearside front and offside front inner discs are slightly worn

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)