2000 Honda VT125C

Exhaust noisy (7.1.2)

Exhaust noisy (7.1.2)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust noisy (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Handlebar deformed (2.1.1b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Rear Direction indicators not working (1.5.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Wheel spoke excessively bent (4.2.1b)

Rear position lamp insecure (1.1.1c)

Exhaust noisy (7.1.2)

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain worn but not considered excessive (6.2.1e)

Rear Wheel spoke slightly bent. (4.2.1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear reflector on motorcycle missing (1.4.1)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Rear Wheel spoke slightly bent. (4.2.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Wheel alignment slightly misaligned. (2.5.1)

Front Brake disc(s) slightly worn (3.2.A1l)