2000 Honda VT125C

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

Rear Brake binding but not excessively (1.2.1 (f))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Stop lamp not working (4.3.1 (a) (ii))

Front Brake excessively binding (1.2.1 (f))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Headlamp aim too high and too far to the left (4.1.2 (a))

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

horn switch needs attention

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear Brake locking device missing torque arm (3.2.A1e)

horn switch needs attention

Drive chain slightly loose (6.2.1d)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Exhaust noisy (7.1.2)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

reg plate needs replacing asap

Exhaust noisy (7.1.2)

Front Roller brake test indicates a binding brake (3.3.A1a)