2013 Lexmoto Ht

Exhaust has a minor leak of exhaust gases Repaired with paste (6.1.2 (a))

Drive chain excessively tight (6.1.7 (k) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Headlamp aim too high (4.1.2 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Tyre is unsuitable rotation incorrect (5.2.3 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced swingarm (6.1.1 (c) (i))

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp aim unable to be tested (4.1.2 (b))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Wheel alignment slightly misaligned (2.4 (a))

Front tyre slightly perished

Front Mudguard insecure ()

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Indicator switch insecure (4.4.2 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Headlamp aim too high (4.1.2 (a))

Indicator switch insecure (4.4.2 (a) (i))

Stop lamp not working rear switch (4.3.1 (a) (ii))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))