2013 Lexmoto Arrow 125

Drive chain excessively tight (6.1.7 (k) (i))

Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Brake pedal is bent and the brake cannot be readily applied (1.1.2 (d))

Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i))

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

bolt missing off front mudguard bracket o/s

Headlamp aim too high (4.1.2 (a))

Nearside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Position lamp not working (4.2.1 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Suspension arm ball joint excessively worn [swinging arm bearings] (5.3.4 (a) (i))

Steering headbearing in such a condition that steering control is adversely affected head bearings excessively tight / notchy (2.2.2 (f) (ii)) DANGEROUS

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

bolt missing off front mudguard bracket o/s

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear suspension bush has slight free play SWINGING ARM ASSEMBLY. (2.4.A2a(i))

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Indicator switch insecure (1.5.4)

Rear Drive chain sprocket carrier worn to excess (6.2.1e)

Rear Rear suspension bush has excessive free play SWINGING ARM ASSEMBLY. (2.4.A2a(i))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Drive chain sprocket slightly worn (6.2.1e)

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Rear wheel bearings are slightly rough (2.4.A.2c)