2008 Yamaha YBR125

Exhaust noisy (8.1.1 (a))

Nearside Front Clutch lever bent (6.2.7 (b))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Exhaust noisy (8.1.1 (a))

Nearside Front Clutch lever bent (6.2.7 (b))

Offside Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride chain adjuster locking nuts. insecure. (6.2.1h)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering headbearing has excessive free play (2.2.2)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre valve stem slightly damaged (4.1.2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Brake lever insecure (3.1.2a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))