2008 Superbyke Rmr 125

Chain-guard missing

Exhaust noisey

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Slight wear,rear suspension linkage

Chain-guard missing

Exhaust noisey

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Slight wear,rear suspension linkage

Brake lever has insufficient reserve travel (1.1.2 (a))

Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))

Headlamp aim too low (4.1.2 (a))

Headlamp insecure (4.1.1 (c))

Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Shock absorber has an excessively worn bush (5.3.2 (c))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) DANGEROUS

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain worn but not considered excessive (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Front Brake disc(s) slightly worn (3.2.A1l)

Nearside Front Brake pipe slightly corroded (3.2.B2a)

Offside Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Horn not working (1.7.3a)

Rear reflector on motorcycle missing (1.4.1)

Front Brake disc(s) slightly worn (3.2.A1l)

Nearside Front Brake pipe slightly corroded (3.2.B2a)

Offside Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Drive chain slightly loose (6.2.1d)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly eccentric bead rim. (4.2.2)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have excessive free play (2.3.5b)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Front Tyre worn close to the legal limit (4.1.3(ii))