2019 Benelli Bn 125

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front sprocket cover missing

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front sprocket cover missing

Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust has a major leak of exhaust gases at manifold (6.1.2 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp lens seriously defective (4.1.1 (b) (ii))

Rear Drive chain sprocket excessively loose (6.1.7 (c) (i))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Suspension component pin or bush excessively worn rear swinging arm pivot (5.3.4 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front sprocket cover missing

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement REAR SHOCK ABSORBER (5.3.4 (a) (i))

Rear Upper Suspension pin, bush or joint worn but not resulting in excessive movement REAR SHOCK ABSORBER (5.3.4 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement REAR SHOCK ABSORBER (5.3.4 (a) (i))

Rear Upper Suspension pin, bush or joint worn but not resulting in excessive movement REAR SHOCK ABSORBER (5.3.4 (a) (i))

Throttle operating incorrectly (6.2.7 (a) (i))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))