2012 MG 6

Central Front Integral body structure is corroded but structural rigidity is not significantly reduced subframe (6.1.1 (c) (i))

Nearside Front Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear corroded (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive oil filter (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Driver's door cannot be opened from inside the vehicle (6.2.3 (a))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Advise brake pipes corroded.

Nearside Front Sub-frame ball joint excessively worn (5.3.4 (a) (i))

Advise brake pipes corroded.

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Exhaust shield missing where fitted as original equipment creating a risk of fire Exhaust heat shield at risk of falling off (6.1.3 (e)) DANGEROUS

Brake pipe corroded, covered in grease or other material Offside and Nearside front (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Tyre pressure monitoring system warning lamp indicates a fault (5.2.3 (h) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Brake pipe excessively corroded front to rear side of fuel tank (1.1.11 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Brake pipe excessively corroded front to rear side of fuel tank (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Tyre pressure monitoring system warning lamp indicates a fault (5.2.3 (h) (i))

Headlamp aim too low (1.8)