2007 Mazda MPV

Front Headlamp lens slightly defective both sides deteriorated (4.1.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

heavy underbody corrosion

All the brake disc surfaces corroded

All the metal brake pipes are showing signs of corrosion

N/s/f fog light not working

O/s/f wheel centre cap missing

O/s/r axle bump stop missing

Plastic headlamp lenses in a poor condition

Rear silencer seal up with repair paste.

Tail gate mirror head and wiper arm broken

Various oil leaks, but not excessive

Various small stone chips in windscreen

Various under body and component corrosion

All the brake disc surfaces corroded

All the metal brake pipes are showing signs of corrosion

N/s/f fog light not working

O/s/f wheel centre cap missing

O/s/r axle bump stop missing

Plastic headlamp lenses in a poor condition

Tail gate mirror head and wiper arm broken

Various oil leaks, but not excessive

Various small stone chips in windscreen

Various under body and component corrosion

Rear Registration plate does not conform to the specified requirements (0.1 (d))

All the brake disc surfaces corroded

All the metal brake pipes are showing signs of corrosion

N/s/f fog light not working

O/s/f wheel centre cap missing

O/s/r axle bump stop missing

Plastic headlamp lenses in a poor condition

Tail gate mirror head and wiper arm broken

Various oil leaks, but not excessive

Various small stone chips in windscreen

Various under body and component corrosion

O/s/r axle bump stop missing

Rear brake disc surfaces corroded

All the metal brake pipes are showing signs of corrosion

O/s/f wheel centre cap missing

Rear registration plate slightly deteriorated

Tail gate mirror head and wiper arm broken

Various oil leaks, but not excessive (8.4.1 (a) (i))

Various small stone chips in windscreen

Various under body and component corrosion

Items removed from driver's view prior to test ()

Oil leak, but not excessive (8.4.1 (a) (i))

all brake pipes are showing signs of corrosion

rear number plate slightly deteriorated but still able to be read

various small stone chips in windsceen

various under body and component corrosion

Brake pedal anti-slip provision worn smooth (1.1.2 (c))

Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section/inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section/inner sill (5.3.6 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp switch inoperative (4.5.3 (a) (ii))

Items removed from driver's view prior to test ()

Oil leak, but not excessive (8.4.1 (a) (i))

all brake pipes are showing signs of corrosion

handbrake has a lot of travel

n/s/r light unit damaged repaired with repair tape

rear number plate slightly deteriorated but still able to be read

various small stone chips in windsceen

various under body and component corrosion

Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement both rear mountings perished (2.4.G.2)

Oil leak engine and gearbox ()

Rear Shock absorber has slight corrosion to the casing n/s and o/s (2.7.2a)

bonnet stay loose has no clip

brake pedal rubber worn

coil spring corroded rear n/s and o/s (2.4.C.1b)

coil spring modified but not seriously weakened has non standard springs front and rear (2.4.A.2)

drivers door lock is faulty

gas tank at rear has deep surface corrosion

n/s and o/s rear inner sills have some corrosion just out of prescribed area also both outer sills have covers unable to view

n/s front tyre slightly worn on outer edge

n/s o/s front inner sills have corrosion just out of prescribed area

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement both rear mountings perished (2.4.G.2)

Oil leak engine and gearbox ()

Rear Shock absorber has slight corrosion to the casing n/s and o/s (2.7.2a)

bonnet stay loose has no clip

brake pedal rubber worn

coil spring corroded rear n/s and o/s (2.4.C.1b)

coil spring modified but not seriously weakened has non standard springs front and rear (2.4.A.2)

drivers door lock is faulty

gas tank at rear has deep surface corrosion

n/s and o/s rear inner sills have some corrosion just out of prescribed area also both outer sills have covers unable to view

n/s front tyre slightly worn on outer edge

n/s o/s front inner sills have corrosion just out of prescribed area

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust has a major leak of exhaust gases Cenre silencer (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill end and wheel arch area. (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill end and wheel arch (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Both sills have outer covers fitted.

N/s/f inner sill area holed / rusty ( not prescribed area).

N/s/f tyre worn on outer edge.

O/s/r inner sill area rusting.

Brake performance not tested due to wear in offside front ball joint (3.7.A.1)

Central Exhaust has a major leak of exhaust gases (7.1.2)

Central Upper Stop lamp not working (1.2.1b)

Emissions not tested due to engine coolant loss co end lambda were reading too high prior to coolant loss (7.3.A.1)

Nearside Rear Body has a sharp edge caused by corrosion arch (6.1.C.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded arch (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wing (5.2.6)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Headlamp aim beam image obviously incorrect due to lens deteriorated (1.8.A.1b)

Offside Lower Stop lamp not working (1.2.1b)

Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wing (5.2.6)

Offside Rear wheel bearing rough when rotated (2.6.1)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' air freshener on mirror (8.3.1b)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) DANGEROUS

Coolant leak ()

L P G tank heavily corroded

Oil leak ()

general corrosion on underside of vehicle

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

oil leak

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Braking system leaking (3.6.A.1)

Offside Rear Inner Tyre has a cut in excess of the requirements deep enough to reach the ply or cords wall 235/40W18XL (4.1.D.1a)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Rear coil spring corroded (2.4.C.1b)

front pads getting low

front tyres perrished worn on edges

n/s rear light has repair tape on lense

o/s head lamp faded lense slight distorsion on pattern

wheel n/s front just touching anti roll bar on full lock

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Stop lamp not working (1.2.1b)

Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

n/s rear light has repair tape on lense

o/s head lamp faded lense slight distorsion on pattern

wheel n/s front just touching anti roll bar on full lock

2 x nails o/s rear tyre.

Under-trays fitted obscuring some underside components

centre row of seats not fitted at time of test, so unable to test relevant seatbelts.

centre stop lamp inoperative but unable ti inspect wiring.

Offside Stop lamp not working (1.2.1b)

2 x nails o/s rear tyre.

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Under-trays fitted obscuring some underside components

centre row of seats not fitted at time of test, so unable to test relevant seatbelts.

centre stop lamp inoperative but unable ti inspect wiring.

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

cannot check under plastic covers

coil spring corroded (2.4.C.1b)

coil spring corroded (2.4.C.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

cannot check under plastic covers

coil spring corroded (2.4.C.1b)

coil spring corroded (2.4.C.1b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Front position lamp(s) incorrect colour (1.1.A.3e)