MOT Status
ValidMileage
253,762 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Coil spring corroded all (5.3.1 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
slight oil leak
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sills (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Coil spring corroded all (5.3.1 (b) (i))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both sills (6.1.1 (c) (i))
Coil spring corroded all (5.3.1 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Coil spring corroded all (5.3.1 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and outer sill (6.1.1 (c) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Suspension arm ball joint has slight play both (5.3.4 (a) (i))
Fuel Pipe/s corroded ()
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both (6.1.1 (c) (i))
Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sill (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Rear Exhaust system insecure (6.1.2 (a))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Suspension arm ball joint has slight play both (5.3.4 (a) (i))
Fuel Pipe/s corroded ()
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front cross member starting to corrode
Front under steps badly corroded
outer sills starting to corrode
under sill backs starting to corrode
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under step/outrigger (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch/inner wing (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch/inner wing (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under step /outrigger (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch/inner wing (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill back/floor area (5.3.6 (a) (i))
Front cross member starting to corrode
Front under steps badly corroded
outer sills starting to corrode
under sill backs starting to corrode
Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Play in steering rack inner joint(s)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Rear Rear position lamp(s) not working (1.1.A.3b)
Rear fog lamp not working (1.3.2b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V691 FSX is a 2010 Mazda Bongo in White with a 2,490cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 57.7%.
Across all 2010 Mazda Bongo models, the average MOT pass rate is 66.7% with a typical mileage of 135,155 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying V691 FSX, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 16 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V691 FSX?
You can check the full history of V691 FSX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V691 FSX registered?
V691 FSX is a 2010 Mazda Bongo, first registered on 20 January 2010.
Is V691 FSX safe to buy?
The MOT history for V691 FSX shows 26 tests with a 57.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V691 FSX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V691 FSX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.