2000 Honda VT125C

Offside Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Rear Brake grabbing severely (1.2.1 (c))

Rear Lower Motorcycle structure has excessive corrosion which adversely affects braking or steering frame area suspension swing arm support (6.1.1 (c) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Brake pivot worn, but not excessively (1.1.15 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front tyre sidewalls perished

Offside Rear Brake pedal not releasing correctly brake pedal return spring worn (1.1.2 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Nearside Rear Suspension component mounting has an unsafe modification top shock bolt thread diameter too small (5.3.3 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Tyre worn close to the legal limit 1.4mm (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp aim too low (4.1.2 (a))

Tyre worn close to the legal limit 1.4mm (5.2.3 (e))

Central Front Wheel bearing has slight play (5.1.3 (a) (i))

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Front Brake disc(s) excessively pitted (3.2.A1l)

Front Brake disc(s) excessively worn (3.2.A1l)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear Wheel alignment incorrect which adversely affects the steering (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Wheel alignment slightly misaligned. (2.5.1)

Front Position lamp switch does not operate the front and rear position lamps (1.1.4c)

Rear Brake reaction bracket securing bolt(s) missing (3.2.A1j)

Rear wheel bearings have excessive free play (2.4.A.2c)