2011 Mazda E Series

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front crossmember (5.3.6 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Coolant leak ()

Front cross member slightly corroded.

Nearside rear chassis/cross member corroded.

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Towball/hitch not fitted at time of test ()

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Coolant leak ()

Front cross member slightly corroded.

Nearside rear chassis/cross member corroded.

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Towball/hitch not fitted at time of test ()

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner sill/chassis adjacent to subframe mounting (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear inner/outer door sill and inner wheel arch (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front inner sill/chassis adjacent to subframe mounting (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear inner/outer door sill and inner wheel arch (5.3.6 (a) (i))

Vehicle structure excessively corroded within 30cm of towbar mounting nearside rear crossmember/chassis (6.1.6 (i) (i))

Towbar component corroded, but not excessively (6.1.6 (a))

Vehicle structure slightly corroded within 30cm of towbar mounting offside rear crossmember/chassis (6.1.6 (i) (i))

front crossmember corroded not within a prescrbed area

nearside and offside inner and outer door sill corroded not within a prescribed area

both o/s and n/s inner and outer sills corroded,front cross member corroded , all corrosion may need attention before next mot

n/s/r outrigger corroded

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

both o/s and n/s inner and outer sills corroded,front cross member corroded , all corrosion may need attention before next mot

n/s/r outrigger corroded

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Subframe mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Inner Position lamp not working (4.2.1 (a))

Offside Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Suspension component ball joint has slight play (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Front position lamp(s) not working (1.1.A.3b)

Rear fog lamp not working (1.3.2b)

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)