MOT Status
ValidMileage
137,554 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pedal wearing smooth (1.1.2 (c))
Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material o/s and n/s (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced underside o/s and n/s (6.1.1 (c) (i))
Brake pedal wearing smooth (1.1.2 (c))
Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material o/s and n/s (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced underside o/s and n/s (6.1.1 (c) (i))
Nearside Rear Direction indicator incorrect colour (4.4.3 (a))
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Brake pedal wearing smooth (1.1.2 (c))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement o/s and n/s (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Passenger seat(s) missing at time of test ()
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))
Brake performance unable to be tested (1.2.1 (g))
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Direction indicator incorrect colour (4.4.3 (a))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Leaf spring anchor bracket corroded and seriously weakened (5.3.1 (b) (i))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step/sill (6.1.1 (c) (i))
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Leaf spring anchor bracket corroded and seriously weakened (5.3.1 (b) (i))
Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))
Brake pedal wearing smooth (1.1.2 (c))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement o/s and n/s (5.3.4 (a) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
various corrosion to rear suspension
Brake pedal wearing smooth (1.1.2 (c))
Front Upper Suspension arm ball joint dust cover severely deteriorated o/s and n/s (5.3.4 (b) (i))
Emissions not tested (8.2.2.2 (e))
Nearside Rear Direction indicator incorrect colour (4.4.3 (a))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Brake pedal wearing smooth (1.1.2 (c))
Front Upper Suspension arm ball joint dust cover severely deteriorated o/s and n/s (5.3.4 (b) (i))
Brake pedal wearing smooth (1.1.2 (c))
Front Upper Suspension arm ball joint dust cover severely deteriorated o/s and n/s (5.3.4 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Upper Suspension arm ball joint dust cover severely deteriorated o/s and n/s (5.3.4 (b) (i))
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
various corrosion under vehicle
Emissions not tested (8.2.2.2 (e))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front and rear (5.3.6 (a) (i))
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Service brake efficiency below requirements (1.2.2 (a) (i))
Offside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired mount (6.2.2 (d) (ii)) DANGEROUS
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive engine (8.4.1 (a) (i))
various corrosion under vehicle
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit also has a nail in it (4.1.E.1)
Offside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Anti-roll bar linkage damaged and seriously weakened (2.4.G.1)
Offside Rear Braking system leaking (3.6.A.1)
Offside Side repeater not working (1.4.A.2c)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit also has a nail in it (4.1.E.1)
Offside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear rear brake fluctuating, but not excessively (3.7.B.3)
general surface rust underside
slight wear in o/s/f steering u/j
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Rear rear brake fluctuating, but not excessively (3.7.B.3)
general surface rust underside
rear shock absorbers in poor condition
slight wear in o/s/f steering u/j
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Passenger's seat cannot be secured in the upright position. (6.2.A.2)
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Oil leak
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
nearside rear tyre perished
Nearside rear tyre is starting to perish on outer side wall.
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
How Reliable is the Mazda E Series?
Based on 81,836 MOT tests across 9,731 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V401 DTO is a 2000 Mazda E Series in White with a 2,184cc petrol engine. This vehicle has been through 31 MOT tests with a personal pass rate of 64.5%.
Across all 2000 Mazda E Series models, the average MOT pass rate is 69.0% with a typical mileage of 98,360 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda E Series fails its MOT is brake pipe excessively corroded, accounting for 4,794 recorded failures. If you're considering buying V401 DTO, it's worth having these areas checked by a mechanic before committing.
The Mazda E Series typically stays on UK roads for around 36 years. At 26 years old, this Mazda E Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of V401 DTO?
You can check the full history of V401 DTO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V401 DTO registered?
V401 DTO is a 2000 Mazda E Series, first registered on 28 January 2000.
Is V401 DTO safe to buy?
The MOT history for V401 DTO shows 31 tests with a 64.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V401 DTO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V401 DTO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.