2007 Mazda Bongo

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Central high liner stop light has 2 bulbs N/W

Front and rear b/pads appear low and nearing limits of wear (esp inner pads )

Rear end crossmember areas behind bumper corners, getting abit corroded

Rear outer b/pads low

Offside Rear Rear position lamp(s) not working At cycle carrier (1.1.A.3b)

Offside Rear Registration plate lamp not working at cycle carrier (1.1.C.1d)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting rear end crossmember area next to spare tyre (6.6.6)

Central high liner stop light has 2 bulbs N/W

Front and rear b/pads appear low and nearing limits of wear (esp inner pads )

Rear end crossmember areas behind bumper corners, getting abit corroded

Both headlamp lens in poor condition.

Offside front inner sill corroded and holed.(Not in prescribed area.)

Offside front wiper split but clearing screen.

Surface corrosion at both inner sill areas.

Surface corrosion at offside rear crossmember.

Headlamp deteriorated but light output not reduced (1.7.5a)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Headlamp deteriorated but light output not reduced (1.7.5a)

Front position lamp(s) incorrect colour (1.1.A.3e)

nsf inner sill corrosion hole

nsr crossmember corrosion hole

nsf inner sill corrosion hole

nsr crossmember corrosion hole

Both front end inner sill areas getting corroded (esp N/S/F, corroded through at bottom edge but NOT quite within fail limits at time of test)

Rear Inner b/pads appear abit low

Both front H/Light lenses getting abit deteriorated and hazey and starting to effect beam imager (esp N/S)

Both front H/Light lenses abit deteriorated and starting to effect dipped beam pattern

Excessive corrosion at N/S/F end bottom sill edge area (NOT yet within fail limits at time of test)

Front radiator grill abit loose

Rear Inner/Outer b/pads appear low

Rear Brake pad(s) wearing thin (3.5.1g)

both rear tyres worn badly on inner edges