1999 Kia Pride SX

Front Brake pad(s) wearing thin (3.5.1g)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

coil spring corroded (2.4.C.1b)

front brake imbalance is 24%(max.allowed is 25%)-offside lower

Brake pipe excessively corroded (3.6.B.2c)

Front registration plate dirty (6.3.1d)

Fuel cap/sealing device sealing washer missing (7.2.4c)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Side repeater not working (1.4.A.2c)

Offside Front Windscreen wiper blade deteriorated (8.2.2)

Offside Front front brake binding (3.7.B.1)

fuel pipes corroded

ADVISE DRIVE SHAFT N/S FRONT

ADVISE FRONT WIPER N/S SPLIT

ADVISE O/S REAR TYRE SIDE WALLS

ADVISE REAR WIPER WORN TO EXCESS

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

1 ADVISE H/BRAKE TRAVEL † †2 ADVISE N/S TYRE SIDE WALL / TREAD CUT

Centre Rear Stop lamp not working (1.2.1b)

Front registration plate character(s) not correctly formed (6.3.4b)

Nearside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Nearside Rear Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Offside Rear wheel bearing rough when rotated (2.6.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

( 1 ) ADVISE N/S REAR BRAKE BACK PLATE CORRSION †( 2 ) ADVISE BOTH FRONT BRAKE PIPES TO FLEXI N/S O/S †( 3 ) ADVISE SCREEN CRACK / CHIP ZONE B