2000 Mercedes-benz 312

Nearside Front All direction indicators incorrect colour (4.4.3 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))

Nearside Rear All direction indicators not working (4.4.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FUEL TANK STRAP (6.2.2 (d) (i))

Offside Front All direction indicators incorrect colour (4.4.3 (a))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced STEP (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Shock absorbers has light misting of oil BOTH (5.3.2 (b))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear diff seal leaking

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced centre around fuel tank mounting (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front outer wheel arch corroded

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced centre (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Shock absorbers has light misting of oil both (5.3.2 (b))

Nearside Rear Brake prescribed area is excessively corroded load sensing valve (1.1.21 (e) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drop link mounting (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring shackle (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drop link mounting (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drop link mounting (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring shackle mounting (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength drop link mounting (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear diff seal leaking

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced fuel tank mounting (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front outer wheel arch corroded

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced centre (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive shocker mounting (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear diff seal leaking

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive shocker mounting (5.3.6 (a) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring bracket mounting (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive shocker mounting (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear diff seal leaking

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive shocker mounting (5.3.6 (a) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Play in steering rack inner joint(s) ()

vehicle underside corroded in several places

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

vehicle underside corroded in several places

Nearside Body has slight corrosion full chassis (6.1.B.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front door corroded

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Body has slight corrosion full chassis (6.1.B.2)

Offside Front Body has slight corrosion sill (6.1.B.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front door corroded

Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

slight play in o/s track arm

Nearside Front Steering system has slight free play detected at steering wheel (2.2.A.1b)

both rear back/plates slightly damp

movement in n/s/f anti roll bar drop link arm bush recommend new

o/s/f seat belt slow to retract without assistance

recommend 2 lights fitted at rear number plate light insted of only 1 fitted

throttle pedal no pad fitted

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both front anti roll bar drop links have movement

both rear inner discs worn and corroding

n/s/r back/plate inner housing slightly damp with oil

slight n/s/r brake fluctuation

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)