MOT Status
ExpiredMileage
15,143 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Front Lower Suspension arm has slight play in a pin/bush (2.4.G.2)
Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
front crossmember corroded but not within a prescribed area.
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Rear coil spring corroded (2.4.C.1b)
Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
front brakes release unevenly (3.7.B.4)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front coil spring fractured (2.4.C.1a)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)
Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Stop lamp adversely affected by the operation of another lamp (1.2.1f)
f/o/s headlight misty
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.5c)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Sub-frame rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Registration plate lamp not working (1.1.5c)
Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front position lamp(s) not working (1.1.A.3b)
Headlamp aim too low (1.8)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Mechanical brake component has restricted free movement (3.5.1k)
Offside Rear fog lamp not working (1.3.2b)
Rear fog lamp tell tale not working (1.3.1b)
Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
unable to check offside front wheel bearing(wheel binding)
Nearside Headlamp aim too low (1.8)
Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
V110 PCA is a 2000 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 50%.
Across all 2000 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 56,069 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying V110 PCA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 26 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of V110 PCA?
You can check the full history of V110 PCA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was V110 PCA registered?
V110 PCA is a 2000 Ford Ka, first registered on 12 January 2000.
Is V110 PCA safe to buy?
The MOT history for V110 PCA shows 16 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does V110 PCA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on V110 PCA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.