1973 Yamaha YB100

Footrest insecure (6.2.1a)

Front suspension has inadequate damping effect. (2.3.6c)

Stop lamp remains on when the brake is released (1.3.1e)

Drive chain slightly loose (6.2.1d)

Front Front wheel bearings are slightly rough (2.3.5b)

Wheel alignment slightly misaligned. (2.5.1)

headlamp yellow lense,,, beam image and output slightly deminished

indicators have been removed

rear drive cush slightly worn

Front suspension has a slightly reduced damping effect (2.3.6c)

Front wheel bearings are slightly rough (2.3.5b)

Wheel alignment slightly misaligned. (2.5.1)

all indicators have been removed

headlamp beam image and output slightly deminished

rear drive cush rubbers, slightly worn

Front suspension has a slightly reduced damping effect (2.3.6c)

Front wheel bearings are slightly rough (2.3.5b)

Wheel alignment slightly misaligned. (2.5.1)

all indicators slightly affected when headlights on

headlamp beam image and output slightly deminished

rear cush drive rubbers slightly worn

Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii))

Drive chain excessively loose (6.2.1d)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Tyre is incorrectly seated on the wheel rim (4.1.2b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front suspension has a slightly reduced damping effect (2.3.6c)

Front wheel bearings are slightly rough (2.3.5b)

all indicators slightly affected when headlights on

rear cush drive rubbers slightly worn

Drive chain slightly loose (6.2.1d)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Front wheel bearings are slightly rough (2.3.5b)

advise horn condition

advise, rear brake pedal travel

front brake peroformance too low

front tyre perished on sidewalls

Brake lever has inadequate reserve travel (3.1.3b)

Drive chain worn to excess (6.2.1e)

Front suspension has inadequate damping effect. (2.3.6c)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear position lamp adversely affected by the operation of the horn (1.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Stop lamp affected by the operation of another lamp (1.3.2)

Front wheel bearings are slightly rough (2.3.5b)

advise horn condition

front brake peroformance too low

front tyre perished on sidewalls